Caring:

• You can sit, walk and stand on it, even if your customer wipes his feet on it in the back of your car, just hose it down. It will come up like new.
  
  
• You can put it up in the rain, hail or sunshine. Since it is held on electro statically, water is no problem, just be sure that you rub the glass first so that an electrostatic charge is built up before applying the sign, then using a roller or squeegee remove any water from under the sign. This way it will stay on through all the wind and rain that comes.
  
  
• The material is made to our specifications to provide maximum protection against the UV environment and give the best possible electrostatic adhesion to glass. We use a particularly thick material so that it can be handled with ease and the sign can be removed and reused as often as needed without leaving any residue.
  
  
• It is possible that the sign may fall off, that's because either the glass or the back of the sign is dusty and needs a wash off. The sign is electrostatic and will pick up dust especially if you put the static side on the bonnet of the car or drop it on the ground. A slightly damp chamois will fix this.
  
  
• The best inks available are used to print these signs but you will need to take care to stack them so that the ink surfaces do not face each other, always stack with the printed side up. You will be supplied with a rack for stacking the banners on it if you wish, this rack will hold about 250 banners and enables you to transfer the banners from one side to the other until the particular banner you need is found.

Fixing:

• Window must be clean and dust free
• Rub the glass with a slightly damp chamois or cloth
• Select the required banner making sure that the back side is dust free. If it is a new banner then remove it from the card.
• Place the banner on the glass area and roll or squeegee the air bubbles out.
• Avoid excessive stretching of the banner

Some Don’ts:

• Do not fold banner ink to ink. Even though the ink is dry the ink surfaces may weld together and destroy the sign
  
  
• Although this banner will adhere to auto paint we recommend that you do not do it as some of the auto paints contain emulsifiers that can migrate into the PVC and it may discolor the paint. We take no responsibility for such use.
  
  
• It is best not to get the card wet on any new banner, the cast surface may stick to the banner and it will be difficult to get off.